- Carbon Steel "Non-Galvanized"
- Carbon Steel 16 GA
- 22.875 I.D.
- 1" Spout complete with pipethread nipple
- Welds to the bottom of most 55 Gallon Steel Drums
- NPT adaptor is welded into funnel
- Funnel is 11 1/4" deep to the tip of nozzle
Many of you biodieselers are looking for an inexpensive way
to convert a 55 gal. Drum into a cone bottom biodiesel reactor tank, settling
tank, wash tank, or drying tank. Well, look no further, because you found it.
Bossbuck.com and BayAreaBiodieselsupply.com have teamed up to develop a solution for all you
home brewers out there. This funnel is spun out of this 16 gauge, non-galvanized carbon steel.
The mouth of the funnel measures 22.875 inside diameter. We made this funnel,
so that it would fit a wide range of Drums, because, as you know, not all drums
are created equal. This funnel will fit the biggest drum we found, as well as
many smaller diameter drums. Our funnel is sized to fit the large drums. It can
be formed with a hammer to fit smaller drums to be welded. The neck of the funnel has a 1” NPT fitting that will allow you to
thread on your valves and type work.
At $59.95 plus shipping this funnel will allow you to create a tank to suit your needs, or make as many tanks you want.
|
