The 350lb. capacity hopper has a thick wall of HDPE UV Protected plastic
that will not rot, rust or leak! This maintenance FREE hopper system is
the BEST SELLER in our line. With our Patented Free Choice Protein / Gravity
Head you get the most moisture resistant free choice feeding system available
on the market today !
The Custom Designed head features a 10 degree of angle, and a 1" overhang
on the 4" I.D. feed ports. Each feed port has a drain hole to disperse
any water that enters the tip of the feed port. Our patented design features
an internal cone that dispenses the feed evenly to the three ports. The
3-Way inner sleeve allows the user to control the feed flow of almost all
feed shapes and sizes. Push it all the way up to virtually shut off the
flow, or ease it down until you get the optimal flow on your favorite type
of critter food.
Our double walled hatch LID tops this unit off in style, and function. Built
oversized, this lid allows the hopper system to breath, thus eliminating
condensation while achieving ambient temperature faster than Steel or Fiberglass
NOTICE: Using salt based feed materials/blends through a Boss Buck control system will void the parts warranty! Salt based mineral supplements, such as Big Tine 30-06 mineral blend, will corrode and rust your feeder control box more rapidly than using corn, protein or other non-salt based feeds.
*Important Notice*: We highly recommend you use foot pads on all Boss Buck feeders to protect them from sinking into the ground. Boss Buck offers Standard and Heavy Duty feeder feet as an accessory for your convenience. Please use our foot pads or a suitable substitute to anchor down your feeder!
**Gravity heads are Injection-Molded. We do offer a Roto-Molded Upgrade at $15.00 additional. Roto-Molded units are ideal for use with... High fenced properties, Exotic Species, Aggressive species, Hogs/Boars.**
- Holds 350# Corn (approximately)
- Holds 300# Large Protein Pellets (approximately)
- Free Choice Protein 3-way feeding height 36".
- All galvanized hardware
- Converts from protein to spin feeder in minutes!!
- Feed tubes have 10° Angle
- Feed tubes have 1" overlap on top of each Port
- Feed tubes are 10" long and 4" I.D.
- Each Port has a drain hole
- Feeder dimensions: 34x34x32
- Boss Buck VS Other Feeders Comparison Sheet #1