Poly Gravity Feeder Lower Unit
Non-Typical 55 Gal. Poly-Lower Unit fits 55 gallon barrels, both metal and plastic.
The unit has a 6" down spout. Choose from the 3-way for three legged feeders,
or the 4-way for four legged feeders.
This unit is weather, rust, and leak proof. This maintenance free unit will
provide years of trouble free use. This unit is built to be outside 24-7, 365
days!
Extra deep funnel design adds feed capacity to your 55 gallon drum.
22 3/8" O.D. (Outside Diameter) on the funnel
Funnel without gravity head is 18 1/2" deep
We recommend a feeder leg that is 84" long to make the feed spout height about 40" off the ground.
Please Note: The
3-way heads are designed for feeders with three legs and the 4-ways heads are
designed for feeders with four legs
Please Note: When ordering the Poly Lower Units - Free Shipping on orders over $250.00 applies to customers who are within 750 miles (or less) of Dallas, TX. Customers outside of this region may incur nominal charges for shipping due to the size and weight of the product. All charges will be requested for approval before the order is processed and shipped.
**Gravity heads are Injection-Molded. We do offer a Roto-Molded Upgrade at $15.00 additional. Roto-Molded units are ideal for use with... High fenced properties, Exotic Species, Aggressive species, Hogs/Boars.**
How To Build Your 55 Gallon Gravity Feeder
Cut the bottom out of a 55 gallon drum. Leave a 2" flange on the barrel bottom.
Elevate the drum so that there is at least two feet under it.
Insert the funnel with the spout facing downward. Use a 2x4 (or like object) to set funnel in the bottom of the drum. They are a little tight fitting by design.
Lay the drum on it's side and drill two holes from the inside out. Insert two self tapping screws from the outside inward. Spin the drum and repeat at 180 degrees. This will permanently hold the lower unit in place.
Turn the drum upside down and apply a bead of silicone calk to the seam of the drum and the lower unit. Allow to dry overnight. Install Protein Head (3 or 4 Way) to the lower unit.
Install Boss Buck Barrel Band to the drum. Make sure Barrel Band is positioned so that the three way unit will be evenly spaced between the three legs. Tighten barrel band down for rock solid positioning on your feeder drum.
Top off with the 3" Steel Boss Buck lid for optimal longevity and rust proof performance.
Add legs, round or square material is fine. Must fit over 1" tubing legs on Barrel Band. Feed height for best results is around 40".