Extra large viewing screen allows users with corrective lenses to change time
and function easily. This timer is so easy to use that the directions are printed
right on the back of it. Feeding 1 to 6 times per day for 1 to 30 seconds has
never been easier or simpler. The in line fuse system prevents the electronics
board from being blown from an electrical surge. Runs off the large feeder
battery so it never requires an extra battery to maintain it's function.
Works with either 6 or 12 volt systems. Timers use 10amp fuse.
Timer Dimensions: 4" x 4" x 1"
Altering Timer in any way voids 2 Year Warranty
Our timers work with both 6v and 12v power sources. The battery life indicator
on the timer shows 6v or 12v on the LED screen. If the battery power drops
to 6v the timer LED indicator can show FULL, but it is 6v not 12v. The 12v
motor will not turn with only 6v of power. Replace your battery with a hot
12v battery and press the test button. If the unit is functioning properly
your motor will spin and your LED indicator will now read 12v. We recommend
using a Solar Panel on your battery. In extreme cold conditions the battery
can lose charge even with the solar panel connected. Make sure Solar Panel
is kept as clean as possible For optimum charging capability.
Under the Program Button on the Deer Feeder Timer there is a small hole/button that is your RESET BUTTON. Timers are electronics and subject to occasional glitches due to electrical surges or an absence of electric power. Environmental issues also have an effect on electronics. Extreme cold and hot temperatures can cause electronics to temporarily malfunction. When the ambient temperature is not extreme, plug timer into an appropriate power source/battery. Depress the RESET BUTTON with a pin, tooth pick, or other pointed object that will fit the hole/button for 5 seconds. Allow the timer to re-boot to its original programming. Reset the programmed times you want it to feed and test it for its full range of functions again. In most instances, you will find that this will allow the Deer Feeder Timer to resume normal operating functions.