#1.2.P
#1.2S.P
#1.2A.P
72" Round 16 GA 1 1/2" Legs
3 Way Protein Gravity Head
New Hatch Lid
72" Square 16 GA 1 1/2" Legs
3 Way Protein Gravity Head
New Hatch Lid
100" 4 Pc. Leg Set 14 GA 1 1/2"
25" sections to convert to automatic
3 Way Protein Gravity Head
New Hatch Lid
The 350lb. capacity hopper is 3/8" thick wall of HDPE UV Protected plastic that will not rot, rust or leak! This maintenance FREE hopper system is the BEST SELLER in our line. With our Patented Free Choice Protein / Gravity Head you get the most moisture resistant free choice feeding system available on the market today !
The Custom Designed head features a 10 degree of angle, and a 1" overhang on the 4" feed ports. Each feed port has a drain hole to disperse any water that enters the tip of the feed port. Our patented design features an internal cone that dispenses the feed evenly to the three ports. The adjustable height inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your favorite type of critter food.
Our double walled hatch LID tops this unit off in style, and function. Built oversized, this lid allows the hopper system to breath, thus eliminating condensation while achieving ambient temperature faster than Steel or Fiberglass feeders.
- Holds 350# Corn (approximately)
- Holds 300# Large Protein Pellets (approximately)
- Free Choice Protein 3-way feeding height 36".
- All galvanized hardware and stainless steel inserts.
- Converts from protein to spin feeder in minutes!!
- Feed tubes have 10° Angle
- Feed tubes have 1" overlap on top of each Port
- Each Port has a drain hole
- Feeder dimensions: 34x34x32
- Frequently Asked Questions
Please read the following:
- Conversion items are sold separately.
- Remove protein head when not in use or empty. Residue from corn/feed causes squirrels to chew on the unit when it's empty.
- Note to breeders: We will customize the leg length to shorten the feeders so that they serve as Fawn Feeders.
CUSTOMER PICK-UPS (CPU'S)
The buyer or agent of the buyer is responsible for inspecting all merchandise prior to loading. It is also the responsibility of the buyer or agent of the buyer to personally tie down/fasten/secure the merchandise properly. Employees of Boss Buck Inc. are not allowed to or assist in tying down/fastening/securing of the merchandise. Boss Buck Inc. reserves the right to refuse loading any merchandise in or on any vehicle it deems inappropriate for a given load and thereby a safety hazard. Once the merchandise is picked up and removed from our premises, Boss Buck Inc. is not liable to lost or damaged merchandise due to improper or failure to tie down/fasten/secure the merchandise.
Please Note: All free choice feeders must be shipped freight which will incur a minimum freight charge of $80.00. To cut down costs, it is advised that you have the feeder(s) shipped to a business as opposed to a residence. A $27.50 service charge is applied to all residential (non-business to business) deliveries.If you would like, you could email us with your shipping address and we could get an accurate freight quote for you.
Generally a second free choice feeder ships for little or no extra cost.