200# Capacity Gravity / Protein Feeder
- Tough Roto-Molded Plastic
- Converts from Gravity to Auto in Seconds
- Two-in-One Leg System for Quick Conversion
- Unparalleled Boss Buck Quality
- 200LB Corn Capacity
| 200# Protein Feeder #1.200.P : $230.00 OUT OF STOCK |
  |
350# Capacity Gravity / Protein Feeder - Patent No.: US D543,666 S
- Thick wall of HDPE UV Protected plastic
- Quick and easy conversion from protein to automatic timer
- Hopper weight 30lbs
- All galvanized hardware
- Lid designed with loose fit to allow proper ventilation
- 3-Way system has 10" ports with 4" I.D. openings for a deer's muzzle
- Approximately holds: 350# Corn / 300# Large Protein Pellets
- Converts to Hanging Feeder
| 350# "All In" Protein w/ 4 pc Leg Set #1.2A.P : $325.99 IN STOCK |
|
350# Protein w/ Square Legs #1.2S.P : $299.99 IN STOCK |
600# Capacity Gravity / Protein Feeder - Patent No.: US D543,666 S
- 600# Corn (approximately)
- 500# Large Protein Pellets (approximately)
- "Protein" Feeder Legs 84" 16 GA
- Hatch lid is 3" deep
- 81" from Ground to Lid
- 42" Feed Height (Ground to Spout)
- Inside spread of legs 40"
- All galvanized hardware
- Feed tubes have 10° Angle
- Feed tubes have 1" overlap on top of each Port
- Feed ports are 8" long and 4" I.D.
- Each Port has a drain hole
- Feeder dimensions: 48x48x60
- Converts from protein to spin feeder in minutes!!
| 600# Protein Feeder #1.6.P : $550.99 IN STOCK |
600# "All In" Protein w/ 4 pc Leg Set
- 600# Corn (approximately)
- 500# Large Protein Pellets (approximately)
- 4pc. leg system
- Hatch lid is 3" deep
- All galvanized hardware
- Feed tubes have 10° Angle
- Feed tubes have 1" overlap on top of each Port
- Feed ports are 8" long and 4" I.D.
- Each Port has a drain hole
- Feeder dimensions: 48x48x60
- Converts from protein to spin feeder in minutes!!
| 600# "All In" Protein w/ 4 pc Leg Set #1.6A.P : $579.00 IN STOCK |
600# Capacity Gravity 600# Gravity Feeder - Dr. Kroll Signature Series Edition
- 600# Corn (approximately)
- 500# Large Protein Pellets (approximately)
- Hatch lid is 3" deep
- Gravity 4-way feeding height 42".
- All galvanized hardware
- Inside spread of legs 40"
- Converts from gravity to spin feeder in minutes!!
- Feed tubes have 10° Angle
- Feed tubes have 1" overlap on top of each Port
- Feed ports are 8" long and 4" I.D.
- Each Port has a drain hole
- Feeder dimensions: 48x48x60
- Deluxe Anchoring Foot Pads
- 12 GA 84" Legs
- Custom Dr. Deer Signature Graphic
- "Dr. Deer" James Kroll told us the Protein characteristics that the ULTIMATE FEEDER would have. We listened and here is the result. The ideal feeder for hunters and breeders! "Doctor Deer" himself signed off on it. The James Kroll "Signature Series", available exclusively through Boss Buck.
| 600# Capacity Gravity 600# Gravity Feeder - Dr. Kroll Signature Series Edition #1.6.PS : $625.00 IN STOCK |
1200# Capacity Gravity / Protein Feeders - Patent No.: US D543,666 S
- Thick wall of HDPE UV Protected plastic
- Holds approximately 1200#'s of corn
- Holds approximately 1000#'s of protein
- Height adjustable from 108" to 132"
- Hopper 61" tall x 43½" wide
- Hopper weight 60lbs
- Legs 105" 1½" - 14 gauge galvanized steel
- All galvanized hardware
- Lid designed with loose fit to allow proper ventilation
- Adjustable hardware components allow you to adjust the height
- 4-Way has 5" ports with 4" I.D. openings for a deer's muzzle
- Protein 4-way feeding height 40"
| 1200# Protein Feeder #1-BF12.P : $699.99 IN STOCK |